Known as: cap / cap f 95jn1 60091>> f 94jn4 65489>> f 94jn4 72776>> f 95jn1 51165>>

View/Change Diagram

928 1987-91 - Brakes/Wheels	928 1992-95 - Brakes/Wheels
944 1985-88 - Brakes/Wheels	944 1989-91 - Brakes/Wheels
911 1989-94 - Brakes/Wheels	968 1992-95 - Brakes/Wheels

View/Change Diagram

911 1994-98 - Brakes/Wheels

The kw hls (hydraulic lift system) provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

version hls 4: covers both the front and rear axles of the vehicle.

Features:
- for vehicles with with little road clearance
- vehicle specific applications
- activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
- height changes can be done while the vehicle is moving, up to speeds of 50 mph
- automatically lowering of the vehicle
- with tv certificate
- rub...(choose a part on the right to read more)

General Fitment

The worldest largest aftermarket Porsche tuner, techart, has this rear wing for the Porsche 996 turbo.

Rear spoiler unit with adjustable deck lid and integrated air intakes. Includes engine cover and adjustable wing. Ships ready to paint.

vivid racing is an authorized techart distributor and can handle all of your Porsche needs.


*contact us for special pricing.*

General Fitment

The kw hls (hydraulic lift system) provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

version hls 4: covers both the front and rear axles of the vehicle.

Features:
- for vehicles with with little road clearance
- vehicle specific applications
- activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
- height changes can be done while the vehicle is moving, up to speeds of 50 mph
- automatically lowering of the vehicle
- with tv certificate
- rub...(choose a part on the right to read more)

General Fitment

Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 c2 05+

The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.

features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height ad...(choose a part on the right to read more)

General Fitment

Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 GT3 & rs 07+

The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.

features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual hei...(choose a part on the right to read more)

General Fitment

Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 turbo 07+

The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.

features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height...(choose a part on the right to read more)

General Fitment

Will ship when available.
All momo steering wheels require the use of a hub adapter. This is because each wheel is a universal wheel and the correct spline is required to fit different manufacturers. It s also important to set the wheel at the correct distance from the driver and clearance for things like the wiper and turn signal stalks.

Note: for cars without airbag
Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels. Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to a steering wheel failure which can cause an accident resulting in serious per...(choose a part on the right to read more)

General Fitment

Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 c4 05+

The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.

features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height ad...(choose a part on the right to read more)

General Fitment

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Spec stage 3 clutches feature a carbon semi-metallic 6 puck sprung hub disc that has been the leading puck clutch in drivability, life and torque capacity. This unit is designed for street and race cars that require an aggressive but streetable engagement and high torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability.

Spec 3 clutches are great for street, drag, road racing, pulling, rallye and drift.

General Fitment

Stoptech brake lines consist of a ptfe (commonly referred to as teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The ptfe tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. every stoptech brake line is 100% tested in-house to a pressure of 4,500 psi. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder. stoptech is a registered brake line manufacturer with the united states DOT and all stoptech stainless steel brake lines are manufactured to meet DOT compliance standards. Stoptech stainless steel lines also meet or exceed fmvss 106 and applicable...(choose a part on the right to read more)

General Fitment

Spec stage 3 clutches feature a carbon semi-metallic 6 puck sprung hub disc that has been the leading puck clutch in drivability, life and torque capacity. This unit is designed for street and race cars that require an aggressive but streetable engagement and high torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability.

Spec 3 clutches are great for street, drag, road racing, pulling, rallye and drift.

General Fitment

What good is more horsepower if it isn't transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more 'bite' while increasing reliability and performance.

Applications: street, drag, pulling, autocross. Features...(choose a part on the right to read more)

General Fitment

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These p...(choose a part on the right to read more)

Rennline's stainless steel folding race hook install in minutes on any Porsche with factory screw type removable tow hook. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", rennline's stainless steel tow hook is a precision machined and will stand up to the extreme abuse seen in any race environment. With a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a hook that are highly visible and h...(choose a part on the right to read more)

Complete carburetion kits !

Complete kits include pre-jetted and sized carburetors, manifolds, linkage, K&N watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.

The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger ma...(choose a part on the right to read more)

General Fitment

Complete carburetion kits !

Complete kits include pre-jetted and sized carburetors, manifolds, linkage, K&N watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.

The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger ma...(choose a part on the right to read more)

General Fitment